Did you own a Hp LED monitor? and did you experience a power problem? Not the no power but the power light is still on but the display of your screen is on and off. And you can turn off your monitor screen using the power button.
This is not a circuit board failure or any other parts inside of the monitor screen. But this failure occurs when the OSD message appears when the power button is pressed for more than 10 seconds. Don't worry about this, this is a very simple problem and a very simple solution. It just needs a hard reset for your hp monitor screen. Just follow the instructions below.
But before you proceed the be sure that your monitor screen has the power or sure that the light indicator on the front is still lighted.
HOW TO PERFORM HARD RESET OF Hp MONITOR THAT WON'T POWER OFF WHEN PRESSING THE POWER BUTTON
- If your computer is turning on, just properly shutdown and remove USB drives inserted in the USB port.
- Remove the power cable connection of the monitor screen including the CPU.
- Then press and hold down in just 30 seconds the power button of the monitor screen.
- Then reinsert again the power cable of the monitor screen, then turn it on.
- Then wait for a second the hard reset is resettings the power function. Then try to turn off the monitor screen.
- If your monitor screen turning off normally, the monitor power on/off function is normal now.
- Power on your system unit or CPU, then observe the on/off behavior of the display is gone. This is understood that your monitor screen is normal now.
No comments:
Post a Comment
Note: We have Zero Tolerance to Spam. Avoid Promotions with 'Links' considered as spam will be deleted immediately upon our review.