How To Recover Files Using Stellar Phoenix Data Recovery Software

One of the storage disk I encountered is the Transcend Micro SD memory card of a smart mobile phone. I found that this storage is corrupted. And I know some of the storage like this if corrupted, all files in here will not retrieve. Due this if you attempt to format or delete the files inside here, you will notice that it will remove but after you close the drive, then open again the drive the files still there. This is because the files you remove or format is just like recopied again back to its normal state.

Without trying to recover it, you will lose important files. And this a very headache and worse experience in using a memory card like this. Thanks, I found this Data Recovery Software called "STELLAR PHOENIX DATA RECOVERY", through the help of this software I really recovered all the files of this storage and put in an other drive as backup. See the image below here:

STORAGE FOLDERS UNDER ROOT DIRECTORY WAS RECOVERED

  

ALL IMAGES WAS RECOVERED

Here you can learn through this instruction how to use this amazing program on your computer. But first you need to download this version of software in this link: STELLAR DATA RECOVERY SOFTWARE PROFESSIONAL either you after you use the trial version you will buy the license key to register your program as professional. After you download this program, open the location drive where the files is stored and double click the icon to execute.

HOW TO USE STELLAR PHOENIX DATA RECOVERY SOFTWARE- To use this recovery software is very easy and effective. Just follow the procedure below here:

1. To open this program, double click the icon at the left of your desktop. Wait a minute until the user interface will display.

2. If you see this on your screen, you can select either one of the tasks here, if you don't need the other mention here. Just tick the box to uncheck the other selection. Then click next button right lower down on your screen.

3. Then in another window like the image above here, you need to select the drive to recover the files inside it. Like the USB flash drive, if the storage is Micro SD memory, you need a USB card reader on it. Then click scan button below right side down on your screen.

4. Scanning of files needs to recovered is until 100 percent. Wait until it will finish and the system will pop-up the recovered files.

5. After you will receive a pop-up informing the "Scanning Competed Successfully" just click OK button to start saving the recovered files.

6. After scanning the disk you need to save the recovered files into the safe drive or in the external drive. Click receiver button below right side to start saving the files. Take note, saving the files will take a long time if there are many files like images and movies stock of the drive you recovered.

CONCLUSION:

As my experience in using this software, I can prove the performance of this software is 100 percent to recover your loss files as what I did on my part in my computer troubleshooting business. Recovering files is one of my services in my customers. You can assure that this software will work accurately and make you satisfy with the updates to make this program more potential.

Fix Start-up Problem Of Computer Due To Over Temperature

Not all the hang-up problem of computer cause of operating system start-up file problem. This is because the hardware is also the main cause because of the parts failure. Like the failure of the VGA or graphic adapter cooling system, like the water block use to normalize temperature of the VGA. One of the causes why the cooler fan not rotating in exact RPM or revolution per minute is due of the clog or dust build-up. And also the weak capacitor use of the Mainboards or (MOBO) and VGA. The main cause why this happen because of the lack or poor maintenance of your computer. Learn below how to diagnose and fix this problem in a simple way.

1. DIAGNOSE WHAT HAPPEN TO THE HARDWARE

First turn-off your computer and open the system unit or CPU. Then check if the computer uses video card or VGA card. If it is using this part use your hand to touch the VGA card. If you sense that the VGA produce uncontrolled heating property or overheat. Check the VGA card by removing it in the CPU case and check if the cooler fan can rotate exactly. If not, this is the main cause why the video card got overheated. You can remove this part and you can lubricate it using a mechanical oil or lubricant solution. If not replace it with a new compatible cooler fan.

This part need to lubricant or replace it

The circled in red it's a capacitor part of the motherboard that perform abnormal

2. CHECK THE MAINBOARD (MOBO) CAPACITOR IF IT IS GOOD CONDITION

One of the causes why the computer, hang-up or freezing, this is because of the capacitor weak performance. You can notice it through visual inspection once you open your CPU. You can compare it to the other good capacitor appearance of the top of the capacitor. If you notice this you can change that capacitor since the display is normal. But if you change that weak and abnormal caps, replace the mainboard or MOBO with a compatible of your processor and RAM or main memory.

3. USE BUILT-IN VIDEO CARD OR DISPLAY CARD

Since you can't use your video card, check if your motherboard has a built-in video card adapter or a VGA port on the rear panel. The problem will fix after also you change the abnormal or weak caps of your motherboard. Check the image below:

After following all the procedure above, try to power-up the CPU. But first check all the connections are properly connected like orientations of the cables and the connection of hard disk drive (HDD). Check also the main memory is properly attached to the memory slot. Now, connect your monitor to the built-in VGA port of the motherboard and power-up your computer. If the computer performs now normally like the start-up of the windows, your problem is solved.

Perform Maintenance Task To Improve Computer Performance

If you notice your computer seems slower than before, it probably is overtime. Computers get slower because files maybe become disorganized inside the storage. This maybe because of the many files and data stored. And other resources are consumed by unnecessary software you installed before. But in our own benefit, Microsoft Windows like Windows 7 is built-in with tools to clean up the computer and restore its performance. This post will help you guide to tune up your computer.

But before doing anything else, make sure that you have backup your files on an external drive. Some of the steps of this post may cause problems when you do it, which may cause the computer, like can't boot or start windows in normal. It's better that your important files inside your disk is backup externally.

1. REMOVE UNUSED PROGRAMS

All the programs that you don't need is subject to removal. All programs you installed in your computer disk use bytes space. And in some cases it will run without knowledge from you like the updates you didn't notice. Removing this program is a big help to restore your normal computer performance. 

2. INSTALL AND RUN ANTISPYWARE, ANTIVIRUS, ANTIMALWARE SOFTWARE

If viruses, spyware, and malware penetrates in your computer system and files your computer tremendously suffer and got slower. Most of the programs can be removed using Add, remove programs function. But if your computer encounter like spyware and malware this is a stubborn and very headache. This might be installed without your knowledge because it might be coming from a USB flash drive or on the internet site. To install this antivirus programs like Avira and MCShield its a very help to detect and remove any unwanted programs. 

3. FREE UP WASTED SPACE USING DISK CLEANUP TOOL

Removing unused programs in your computer disk space is a great way to free up bytes space in your computer storage. That can speed up your computer. Another way is to find a waste disk use by your old files not important. Use disk cleanup to perform this function.

4. PERFORM DEFRAGMENTATION OF HARD DISK DRIVE

All files on the computer are fragmented or scattered somewhere in different sectors of HDD. If you save files more and more this will fragmented somewhere in a disk space. If this is the condition of the files inside a storage, it takes longer for the computer to read it. Because it has to skip to different sectors of a drive. It's just like reading a news delayed in a few seconds to find a page in the middle of all pages.

Disk defragmentation improves the computer performance by reorganizing the files.

5. DISCONNECT UNUSED NETWORK CONNECTIONS AND UNUSED SHARED FILES

If your computer is connected in a network of computer like Local Area Network (LAN) a group of more than one computer, it is useful to share files between the computer by mapping the drives. Mapping this drives allows the computer processor to read and write files to the other hard disk drives. The problem here when Windows will attempt to connect to the network drive when it starts, the computer does not respond immediately, cause the windows to wait that will cause slow down of the computer. 

By following this article stated above and perform this once a week, 90 percent of your computer system peak of the normal performance.