Featured Post

Complete Parts and Function of Computer Keyboard


Solve Problem in Saving Movie in Windows Movie Maker

Movie Maker Output

The most common headache in using the Movie Maker is during saving a movie file. Then after a while the progressive indicator will notify eight percent improvement. But a while latter it will suddenly stop the saving and a popup window will notify that saving the file cannot continue because of a certain error. This is I’ll always encountered during I saving the movie maker file in a longer minutes. Because I don’t even reading any instructions provided by the program. It’s because we are timid in reading it. And we are contented that we can convert the movie itself in a desired format. But it’s tragedy, after formatting it you cannot save it. And that’s the time we can receive the troubleshooting instruction.

Now, let’s consider what the “Microsoft” told in help section of the Movie Maker. And this is also our best learning material that we should read and learn first the thing that we wanted to use. Just read below the troubleshooting guide before to do anything else of your movie, image or jpeg files.
  • Troubleshooting saving a movie to My computer
This section covers the following issues when saving a movie to My computer.
Explains what you can do if your movie file cannot be created because it exceeds the 4 GB file size limit supported by the FAT32 file system.

Apply Extra Precautions in Handling of Hard Disk Drive

Hard Disk Drive or HDD is the most delicate part of the PC. Because this part or hardware of PC is the main storage media, the highest storage media, and the station of the operating system. This HDD is also the storage of our save important files or backup data that usually stored in drive D:. This part of PC is easily broken or got failure once the user don’t apply extra care or precautions in handling his/her computer PC. The internal parts is build with a spindle motor mounted with it the  platter or the magnetic core that easily crush once the PC is automatically off without proper shutdown. And also a total blackout of the electricity is one of the major cause of the failure of the HDD. So to avoid with this incident or damage to our computer HDD we need to apply proper care in running our PC. And use a voltage regulator with UPS to avoid the auto off of the PC once their is a total blackout will occurred.
Just consider this factors below why our HDD damage. And what we can do to avoid this. And if ever will happen the HDD failure what we can do to our files inside in retrieving the important files. 

Create Worksheet using Open Office Application

Another program that we can use in our computer is called the Open Office. This program installed or we can installed in our computer is the same with Microsoft Office. This is intended once we cannot afford to purchase the Microsoft Office 2007 or 2010 or the lower versions. This is compatible with the MS-Office document source such as the .xls. There are only fewer changes of the navigation of the button because it is using a drop/down menu compared to the newer Microsoft Office friendly User Interface that using the tabulated menu. And also the command buttons of the toolbars it have fewer changes or difference. But if you have basics of the Microsoft Office, it is easy and can be manipulated readily and easy to familiarized.

Now, to create this application that I would impart to you is the same with the Microsoft office. In how to highlights using the shift of the keyboard. In order to create a single worksheet table in a single workbook. It's also needed that you have familiarization of the parts of the User Interface. So that you can understand the instructions. Just follow the instruction below and look also the picture situated left side of this post.

Pointers for NC2 TESDA Exam

POINTERS FOR THE NC2 EXAMLearn the basic tools and equipment use by technician. It’s also one of the question by the assessors during NC2 exam. And study what I mention below.

I let you to understand this, do it hardly in exploring and studying. No matter what life we have, all sources of income is surrounded us.Just study and do not underestimate the exam. maybe it’s simple to others but very time consuming and do not bothered your self with this. The idea is make your self hardship and become an expert.

This is only a pointers for your exam in NC2. What I learned and experience in my technical years of my profession and teaching. And the other side a biomedical technician. All the critical aspects of the exam are performed during training. So what would be taught by your instructors just follow and strive hard, it's a very boastful to our selves if we past the exam through our efforts and learning. And do not forget to ask our creators to provide us of what we need in our lives.

Here is it! just study also the video in this post. It will help you also to gather more ideas and the link provided here: How To Pass The NC2Internal Dos CommandBIOS SETUPEXTERNAL DOS COMMANDDUAL BOOT SYSTEMInstall Windows XPBasic Networking, Requirements For the NC2 ExamCommon Parts Inside System Unit

There are four core competencies of technicians or CHS. That is called full qualifications as NC2 passers, I was posted it here in my blog.
  1. Learn the safety precautions and 5’s of the technicians.
  2. Learn the basic electronics, you need to understand the electronic components.
  3. Study and familiarized very carefully the hardware of computer.Both input and out system,such as to familiarize and memorize the parts of the keyboard and different keys.
  4. Learn and understand the MOBO parts and functions and daughter boards.Not by the book alone but use our visual inspection of what you see is what you learn as a technician.The most applicable is memorize it.
  5. Learn and do the best installation of the hardware.Be sure to apply zero insertion force and familiarize or aware the pin 1 orientation.Or what I called red to red inspections.
  6. Be careful or learn strictly the procedures of the installation of the Operating System. The installation of winXP and windows 98 in dual boot.But be aware, learn also the installation of the new OS.
  7. Learn the windows installation partition,especially two partitions and the filling systems
  8. Learn the operation of the basic MS-DOS of the technician
  9. Learn the backup system using windows backup
  10. Learn the most applicable computer terms or acronyms
  11. Learn how to open the wordpad and how to save a document or learn the basic operation of the windows application
  12. learn what is LAN, network models,topologies,and OSI layer
  13. Learn the network classes and formats
  14. LAN wiring
  15. TCP/IP and workgroup and how to setup it in our computer
  16. Files sharing and printer sharing
  17. Familiarize the communication media,ex: NIC and routers, etc. and how to connect it
  18. Be sure yourselves in basic trouble shooting of computer,ex: the procedure on how to troubleshoot a power light is on nothing happens and nothing on screen.
  19. Common Contact cleaner of technician
  20. Dual boot system of computer and the advantages and disadvantages
  21. Type of HDD and cables
  22. Beef codes
  23. PSU voltage output through wire colors
  24. Hertz and capacity of the processor,memory,and MOBO
  25. ISP and the companies, example MyDSL
  26. hardware conflict and learn how to solve this problem using software and hardware
  27. What is IC creep and what is the possible cause and remedies
  28. How to maintain computers
  29. Installation of driver softwares, both auto and plug in play
  30. The basic settings of the CMOS/BIOS including how to disable BIOS in BIOS setup (3 way)
  31. Different Filling Systems
  32. Peer to peers connection and dedicated server
  33. And be aware of using the control panel and the device manager.
  34. Type of a printer both dot matrix and colored printer and the basic trouble and possible remedies. Paper Jam    
As what I learn this day, there are other additional part of the exam such as the configuration of the router. But to sure of this just study also the Metropolitan Area Network (MAN) most specially the connection and remote addressing. It’s very ok if you have learning of the CISCO installation. Just leave your questions in comment bar below. GodBless to all and goodluck to the exam.

What Is Open Office Impress

Open Office Impress UI
Open Office Impress is one of the office automation program that could be use for our documents. This application program that could be installed in our computer is the same with the Microsoft Office Power Point Presentation. This program would be use for presenting our documents to our audience either in a board meetings, seminars, or to the school rooms. This program is free to download and own by the Apache Software Foundation. Unlike the Microsoft Office you need to buy the program before you can installed and use this office automation program.

Just download this program here:File Hippo Search and install it in your computer before you can use it. But you need to learn first the basic parts of the open office impress.
  1. TITLE BAR- this is use to display the filename of the document with the control toolbox installed in the right side end.
  2. MENU TOOLBAR- these are the tools could be use for your application of the document presentation, such as the page setup that could be found in the Format menu.

The Main Assembly of Computer System Unit or CPU

Main Hardware Connection of PC System Unit
As a user of the computer, we need also to learn what is the main hardware. And how to connect it to the motherboard of the computer. The motherboard serves as the sub- assemble of the personal computer. Because it connects the main hardware and the connections outside of the computer. But if we are not troubleshooters and no experience in repairing the computer system unit (CPU) it is very difficult for us to identify and point out where to connect the hardware even the mouse or keyboard that basically needed when we will use the PC.

So, here are some common instructions on how to connect the hardware inside your system unit. And what is the hardware you need to installs? See the image left side of this post.

  1.   The Motherboard (MOBO)- there are different connections mounted inside the motherboard. But you need to identify only the very important connection such as the ZIF Socket for mounting the processor. It is covered by a cooling system or what we called an air block that will control the normal temperature of the processor, the IDE or SATA connectors that connect the main storage media such as the HDD and CD/DVD ROM. Mount this in the system case properly using the metal or plastic stand-off.

How To Build A LED Circuit Board

The light emitting Diode or LED is now very popular among us in our home and community. Because it is a lower power consumption and no harm in terms of what we called radiation. Unlike the mercury Lamp in any of our gadgets and lights it is high power consumption. Like example our old Television type called CRT(Cathode Ray Tube), this type of Television is very harm in radiation of the Picture Tube that have a kinetic voltage inside of more that thousand of volts to generate and image to the screen from the television network.

But as of now we observe in our places in our main streets, they setup now a high definition television or what they called HD TV or monitor for the moving advertisement. With it comes to our flash lights and other gadgets such as Cellphone and laptop/Notebook display are now also LCD setup. Now the purpose of this post is to try you to learn How to build or make a LED CIRCUIT board, so that you will learn also how to build a certain projects using a LED. Maybe in our place it have no electricity, so because this LED light is only 5 volts DC supplied you can use motor battery and or any dry cells that can produce 5 volts or 3.5-3.8 volts.

Just look also our YouTube video in this post, so that you will learn and observe how I do it. 

  1. Circuit Board at least 2 x 2 or 1x1 in size or it depending to the size of your project or how many LED do you need.
  2. Masking Tape- Use for pattern design
  3. Pencil

How To Become A YouTube Video Publisher

combinebasic YouTube Channel
You heard now that other people or user of the Internet got a high income using the YouTube channel videos. And we could tell also that I can do this also. Yes! of course, even a newbie videographer or a professional on the Internet can do this. Because it's just very simple to setup the YouTube account. And after a number of days you will receive high income from your YouTube Channel account through the Google Adsense Ads.

To work in this application on the Internet you need to set up a Google Account in all Google products. It's understood that if you create or registered in Google mail called gmail, then automatically you have now an account on YouTube. All you have to do is to familiarize and learn the YouTube environment. Then right side above of your YouTube screen is situated your account profile. And just left of it, it's your YouTube Channel link.

But always remember, that to become a YouTube partner is not easy. You need to study the Terms and conditions of this very popular of the Internet, it's a video sharing community. Meaning there are many to consider before we become a video publisher. And it's very suggested that we need to study, read and learn the Basics of the Google and YouTube community.

Here are some articles to be read, study, and learn to avoid the violations that we don't expect because we enter into a community that we even know the laws and regulations or violating it in our own will. Remember as a video publisher, we are responsible of our videos. And the time that our videos is flagged as violates the YouTube community our video monetization will be terminated as well as also our Adsense account also will be terminated. Kindly click this link: Partner Program Policies